Shop

This is where you can browse products in this store.

Original price was: $28.00.Current price is: $26.00.
Original price was: $28.00.Current price is: $26.00.
  • Made in New Zealand using a luxurious blend of possum fur with merino lamb’s wool and nylon
  • This blend means you’ll get a light, soft and luxurious glove that will keep you warm without the bulk!
  • Possum fibre has no scales which gives it both lightness and warmth, it also will not freeze, even when exposed to prolonged periods of cold – perfect for those icy winter days. Possum fibre has a hollow core which also enhances the insulation properties
  • Fingerless glove style allows you to still tap away on your tablet or smartphone with ease!
  • Composition: 55% Merino, 30% Possum, 15% Nylon

7 colours available: black, charcoal, natural, denim blue, red, khaki, royal blue.

Gloves: are available in S, M or L:

Small – suits palm circumference up to 19cm

Medium – suits palm circumference up to 23cm

Large – suits palm circumference up to 26cm

Original price was: $325.00.Current price is: $289.00.
Original price was: $325.00.Current price is: $289.00.

With Ride-Tuned external features and patent pending internals, the Revo-F is the new flat pedal of choice.

Featuring a two-axis concave pedal body, fully useable pedal platform and a pin system for fine tuning grip levels, the Revo-F offers unrivalled on-trail performance.

The Revo-F spins on an extra wide Igus bush and three cartridge bearings, with the internals fully sealed from the elements. Patent pending internals allow easy home maintenance, using standard tools.

The Renthal Revo-F is packed with unique features to deliver the ultimate Ride-Tuned on trail performance, tuneable grip levels, ease of maintenance and bomb-proof durability.

RIDE-TUNED

Fully concave platform, in two axis, to give the highest level of support and control. The deep concave profile is achieved whilst still retaining a thin outer depth of just 18mm.In addition to this, asymmetric pin positioning and an increased width axle makes the full platform and all ten pins useable, for all shoe sizes.

TUNEABLE GRIP

Revo-F pedals come factory-fitted with ten 5.5mm height pins per side. Supplied with the pedals are a further forty pins and forty washers. Using a combination of these, the pin height can be adjusted from 5.5mm to either 4.5mm, 3.5mm or 2.5mm, making them one of the most tuneable pedals available. Additionally, all the pins are screw-through type, so can be easily removed if damaged through impact.

UNIQUE AXLE SYSTEM

The patent pending axle system, featured in the Revo-F allows full home servicing, using standard tools, found in anyone’s toolkit. All is required is a 6mm and 8mm hex-key, a standard 8mm socket, a torque wrench and a mallet.The unique system uses the axle to both remove and re-install the bushing. The bearings are also pressed into place, using the pedal internals.

DURABLE INTERNALS

Inboard, the Revo-F spins on an extra-wide Igus bush, sealed with a full-contact wiper seal. Outboard there are three cartridge bearings. Two smaller bearings and a larger bearing in the outermost location, sealed with an end-cap O-ring.Adding to the durability of the bearings is the full-length axle. Mounting the bearing at the outer edge of the pedal gives them the best support, to protect them from damage in a rock-strike incident.

FORGED AND CNC

The main body of the Revo-F is made from forged 6061 aluminium. The pedal is then fully CNC machined, to remove as much material as possible. To improve rock strike performance, the front face of the pedal has been kept smooth, without any cut-outs. This allows the pedal to slide over rocks, rather than grabbing them.Internally the pedal body spins smoothly around a high-grade, forged, machined and precision-ground chromoly axle.

Original price was: $49.99.Current price is: $47.00.
Original price was: $49.99.Current price is: $47.00.

It’s a grip. OK, it’s a bicycle grip. We can’t and won’t say it the best bicycle grip, because bicycle grips are a particularly personal thing. Be it damping, thickness, length, texture, shape, … There are simply too many boxes to tick to make a grip your favourite, there simply can’t be THE ONE, can there? Well, we did try to make a grip with a lot of features that we hoped would take away with some of the things we particularly did not like with some of the grips out there.

  • Honeycomb design

On some of your favorite grips, you may notice that, in a matter of a few rides, you can see small parts of the rubber already get twisted/torn or sheared off. Some grips provide excellent damping but the rubber may be too soft/squishy/sticky to be withstanding rough use over a longer period of time. For our Grippy, we settled for a surface structure that reminds of a honeycomb and combined it with a material that provides a very good feel and grip, yet it is stiff and sturdy enough, you can not twist the rubber, which helps keep wear as little as possible.

  • Inner sleeve cutouts

For even more damping on the outside palm area, we designed cut-outs into the inner Nylon support sleeve, creating space for more rubber material all the way to the handlebar for more damping and support of the critical outside palm area.

  • Eccentric/offset design

The Grippy, while featuring a circular diameter is offset from the middle axis. Thinner grips usually allow for a firmer/better mechanical grip, thicker grips can give more damping and comfort. With the offset design, we created more damping where you need it – on the rearward facing side (palm side) of the grip towards the rider side – without increasing the overall diameter of the grip

  • Integrated endcap

One thing we found particularly annoying is, the that outer ends of some grips tear too easily due to lack of or only little protection from improperly designed endcaps. Scraping a tree, going down, these things happen and we do not want the grip to get torn too easily, right? So the black, integrated endcap mainly has two functions: a) the slightly tapered shape gives you excellent tactile feedback to feel where the grip ends and b) it gives solid protection against impacts.

Not really much more to say about a grip, eh?
Well, maybe some obligatory specs:

Rubber material: TPR
Inner sleeve/endcap material: Nylon
Clamp material: aluminum, forged
Color clamp: titanium grey anodized

Weight: 113g/pair
Length: 140mm
Diameter (rubber part): 31mm
For handlebar diameter: 22.2mm

$19.00
  • Made in New Zealand using a luxurious blend of possum fur with merino lamb’s wool and nylon
  • This blend means you’ll get a light, soft and luxurious glove that will keep you warm without the bulk!
  • Possum fibre has no scales which gives it both lightness and warmth, it also will not freeze, even when exposed to prolonged periods of cold – perfect for those icy winter days. Possum fibre has a hollow core which also enhances the insulation properties
  • Composition: 55% Merino, 30% Possum, 15% Nylon

5 colours available: black, charcoal, natural, denim blue, red – Matching Beanies Available too!

Kids Gloves are ONE size suitable for ages 6-10

Care Instructions: Cool wash with similar colours on a wool/delicate cycle. Spin dry after wash to remove excess water. Line dry in the shade. Dry Cleanable. Do NOT tumble dry

Original price was: $55.00.Current price is: $45.00.
Original price was: $55.00.Current price is: $45.00.

MANTA Performance Bicep Coil

Grab a bicep leash to keep your high performance board close by.

Bicep coil leash will not get in your way as much as the traditional “wrist style” also easier on your arm on those big wave days!

One size fits: Small-Med Adults Bicep 

Features:

–       Comfortable padding.

–       Double stainless steal swivels to prevent tangles and corrosion.

–       Coloured leash release strap for quick removal.

–       Rotational cuff; zero leash restriction.

Original price was: $139.00.Current price is: $125.00.
Original price was: $139.00.Current price is: $125.00.

4Play Blueprint Bodyboard Cover

-Padded
-Can Hold up to 3 Boards (Max 1x 44″ + 1x 42 +1×40″)
Zipped front accessory pocket to store fins etc.(mesh vented)
-Top zipped small storage pouch for Keys, Wax & Phone
-Drainage holes and mesh on base and sides of bag.
-Heavy duty Zippers and large front pocket.
-Heavy duty 1680 D canvas for heat and water protection.
-Backpack-style padded shoulder straps, as well as padded shoulder sling on side of bag.

Original price was: $55.00.Current price is: $45.00.
Original price was: $55.00.Current price is: $45.00.

4PLAY Performance Bicep Coil

Grab a bicep leash to keep your high performance board close by.

Bicep coil leash will not get in your way as much as the traditional “wrist style” also easier on your arm on those big wave days!

One size fits: Small-Med Adults Bicep 

Features:

–       Comfortable padding.

–       Double stainless steal swivels to prevent tangles and corrosion.

–       Coloured leash release strap for quick removal.

–       Rotational cuff; zero leash restriction.

Original price was: $27.99.Current price is: $25.00.
Original price was: $27.99.Current price is: $25.00.

The fully adjustable Gloworm Headstrap  allows you to mount the Gloworm Alpha, X2 or XS using the Gloworm Quick Release Helmet Mount (Can also be used with a GoPro Camera). Featuring comfortable and durable elastic straps, the Gloworm Headstrap will securely hold your light and battery pack wherever you venture.

Designed to be used with the Gloworm 2 Cell battery however can also be used with the 4 cell battery using the elastic battery strap as provided with each Light Set.

Get night time Adventure ready!

Original price was: $29.95.Current price is: $25.00.
Original price was: $29.95.Current price is: $25.00.

Upgraded handlebar mount that fits all Gloworm Lights.

  • Made from Carbon Composite Nylon
  • Strong, light, and shock absorbing
  • Available in two sizes to suit 31.8mm or 35mm handlebars

Compatible with all Gloworm Lights, the new Carbon Nylon Quick Release (QR) Bar Mount will have your light sitting directly in front of the stem.  Its super strong design will hold your Gloworm light in the perfect position while taking up little room on your bar.  The mount itself is only 10mm wide and weighs a mere 17 grams!

Original price was: $427.00.Current price is: $349.00.
Original price was: $427.00.Current price is: $349.00.

The perfect bike light has evolved. The Gloworm X2 is now ready to tackle the roughest trails and longest nights with a 2000 lumen output and 4 hour run time – making it the perfect companion for some serious nocturnal adventures. With the Gloworm Link mobile app, you can customise your light levels to suit your exact needs or simply plug and play. The Gloworm X2 (G2.0) is our most robust X2 yet, with a poly carbonate shell battery, fatigue resistant/detachable cable and waterproof rating. You can take this light anywhere and everywhere and it will keep coming back for more.

SPECS:

  • 2000 Lumens (Real, not theoretical output)
  • Gloworm Link Mobile App Compatible
  • 456g total system weight with battery pack (Light 79g)
  • Light Dimensions 29 x 49 x 38mm (HxWxD)
  • Waterproof to IP67
  • 2 x Cree XHP 35.2 emitters
  • 2 optic system (1 x spot/1 x Honeycomb installed)
  • 4 hr runtime on Maximum power
  • 4hr battery charge (with 20W Charger)
  • Wireless TX Remote
  • Power Pack 10 (10000 mAH Lithium Ion Fast Charge Battery)
  • OLED Display on Power Pack
  • Power Bank Capability
  • Overheat Protection

WHAT’S INCLUDED:

  • X2 Light Head (G2.0)
  • Power Pack 10
  • 20W USB C Fast Charger
  • Power Cable Regular and Large
  • Universal Light Mount
  • Universal Helmet Mount
  • 35mm QR Bar Mount with Adapter for 31.8mm
  • Spare Optics (Spot/Honeycomb/Wide)
  • Hex Tool (3mm/2mm/1.5mm)
  • USB C Adapter for Power Pack
  • USB Type A Adapter for Power Pack
  • Velcro for Helmet Mounting
  • Velcro for Battery Mounting
  • TX Remote (G2.0)

DEFAULT SETTINGS:

Low (20%) / Medium (70%) / High (100%).
Special mode: Disrupted flash pattern

Special mode is activated by double clicking the button when the light is off. This allows the user to conduct any outdoor activity without having to cycle through the special mode and having an interruption of a steady light beam. The light is turned off by holding the button for appx 2 seconds.

 

Original price was: $399.00.Current price is: $285.00.
Original price was: $399.00.Current price is: $285.00.

Generation 2.0 of the Gloworm X2 Adventure builds on one of the most popular models and makes it even better. With an output of 2000 lumens being controlled by a set of custom optics, the X2 Adventure is ready for anything. Suitable to be used on its own or paired with a second unit, this low weight setup features a bluetooth remote and 2hr runtime making it both convenient and easy to use. The X2 Adventure is the most versatile light in our range and can be customised using the Gloworm Link mobile app.

SPECS:

  • 2000 Lumens (Real, not theoretical output)
  • Gloworm Link Mobile App Compatible
  • 290g total system weight with battery pack (Light 79g)
  • Light Dimensions 29 x 49 x 38mm (HxWxD)
  • Waterproof to IP67
  • 2 x Cree XHP 35.2 emitters
  • 2 optic system (1 x spot/1 x Honeycomb installed)
  • 2 hr runtime on Maximum power
  • 2hr battery charge (with 20W Charger)
  • Wireless TX Remote
  • Power Pack 5 (5000 mAH Lithium Ion Fast Charge Battery)
  • OLED Display on Power Pack
  • Power Bank Capability
  • Overheat Protection

WHAT’S INCLUDED:

  • X2 Light Head (G2.0)
  • Power Pack 5
  • 20W USB C Fast Charger
  • Power Cable Regular and Large
  • Universal Light Mount
  • Universal Helmet Mount
  • 35mm QR Bar Mount with Adapter for 31.8mm
  • Spare Optics (Spot/Honeycomb/Wide)
  • Hex Tool (3mm/2mm/1.5mm)
  • USB C Adapter for Power Pack
  • USB Type A Adapter for Power Pack
  • Velcro for Helmet Mounting
  • Velcro for Battery Mounting
  • TX Remote (G2.0)

DEFAULT SETTINGS:

Low (20%) / Medium (70%) / High (100%).
Special mode: Disrupted flash pattern

Special mode is activated by double clicking the button when the light is off. This allows the user to conduct any outdoor activity without having to cycle through the special mode and having an interruption of a steady light beam. The light is turned off by holding the button for appx 2 seconds.

 

Original price was: $281.00.Current price is: $219.00.
Original price was: $281.00.Current price is: $219.00.

X2 1700 Lumin Generation 1.0 Clearance! (Last couple)

The ultimate bike light! Featuring 1700 Lumens and a 1.5 hour run-time with the revolutionary Wireless TX Remote.

The X2 1700 is shipped with a 2 cell battery (Half the size and weight of the 4 cell version), allowing the system to be used more comfortably on a headstrap or helmet without too much loss of runtime.  CNC machined from a single block of 6061-T6 Alloy and weighing a mere 89g, the X2 turns night into day.

Wireless TX Remote
The revolutionary Gloworm Wireless TX Remote enables you to keep your hands on the controls at all times and its small size has a minimal footprint on the bicycles cockpit. The wireless remote can be configured to operate multiple Gloworm lights simultaneously using the simple pairing process.

Biking not your thing but still want a performance light for exploring?  Grab the Gloworm headband & the light will bolt straight on & you’re Adventure ready!

SPECS:

  • 1700 Lumens
  • IMT Technology
  • Light Head Assembley only 89 grams
  • Waterproof (IP67)
  • Wireless TX Remote
  • 3.4 AHr Lithium Ion Battery
  • 2 X Cree U2 XM-L2 LEDS
  • 2 Optic system (Spot/Flood)
  • 1.5HR runtime on max brightness
  • Battery mounted fuel guage
  • Overheat and Overcharge Protection

WHAT’S INCLUDED:

  • X2 Light Head
  • 3.4 AHr Lithium Ion Battery
  • Wireless TX Remote
  • Lithium Ion Battery Smart Charger
  • Extension Cable
  • 31.8mm Quick Release Handlebar Mount (35mm upgrade available)
  • Universal QR Helmet Mount
  • Universal Light Mount
  • Spare Optic (Spot/Wide)
  • Hex Tool (3mm/1.5mm)
  • Spare Parts

DEFAULT SETTINGS:
Trail – Low / Medium / High. Special mode: Super Dim
Commute – Low / High. Special mode: Flash (1 Flash every 2 seconds – Flash pattern is High/Low/High)Special modes are activated by holding down the button for 2 sec. This allows the user to conduct any outdoor activity without having to cycle through the special mode and having an interruption of a steady light beam. Additionally, the X2 is shut down by holding the button for approx 5sec. IMT gives you the flexibility of refined programmes and modes without needing to access them every time you go from High mode back to low.