Renthal Bike Parts

With Ride-Tuned external features and patent pending internals, the Revo-F is the new flat pedal of choice.

Featuring a two-axis concave pedal body, fully useable pedal platform and a pin system for fine tuning grip levels, the Revo-F offers unrivalled on-trail performance.

The Revo-F spins on an extra wide Igus bush and three cartridge bearings, with the internals fully sealed from the elements. Patent pending internals allow easy home maintenance, using standard tools.

The Renthal Revo-F is packed with unique features to deliver the ultimate Ride-Tuned on trail performance, tuneable grip levels, ease of maintenance and bomb-proof durability.

RIDE-TUNED

Fully concave platform, in two axis, to give the highest level of support and control. The deep concave profile is achieved whilst still retaining a thin outer depth of just 18mm.In addition to this, asymmetric pin positioning and an increased width axle makes the full platform and all ten pins useable, for all shoe sizes.

TUNEABLE GRIP

Revo-F pedals come factory-fitted with ten 5.5mm height pins per side. Supplied with the pedals are a further forty pins and forty washers. Using a combination of these, the pin height can be adjusted from 5.5mm to either 4.5mm, 3.5mm or 2.5mm, making them one of the most tuneable pedals available. Additionally, all the pins are screw-through type, so can be easily removed if damaged through impact.

UNIQUE AXLE SYSTEM

The patent pending axle system, featured in the Revo-F allows full home servicing, using standard tools, found in anyone’s toolkit. All is required is a 6mm and 8mm hex-key, a standard 8mm socket, a torque wrench and a mallet.The unique system uses the axle to both remove and re-install the bushing. The bearings are also pressed into place, using the pedal internals.

DURABLE INTERNALS

Inboard, the Revo-F spins on an extra-wide Igus bush, sealed with a full-contact wiper seal. Outboard there are three cartridge bearings. Two smaller bearings and a larger bearing in the outermost location, sealed with an end-cap O-ring.Adding to the durability of the bearings is the full-length axle. Mounting the bearing at the outer edge of the pedal gives them the best support, to protect them from damage in a rock-strike incident.

FORGED AND CNC

The main body of the Revo-F is made from forged 6061 aluminium. The pedal is then fully CNC machined, to remove as much material as possible. To improve rock strike performance, the front face of the pedal has been kept smooth, without any cut-outs. This allows the pedal to slide over rocks, rather than grabbing them.Internally the pedal body spins smoothly around a high-grade, forged, machined and precision-ground chromoly axle.

Renthal Lock-On grips feature CNC aluminium locking collars, permanently integrated with the central core, giving the ultimate all-weather security on the handlebar. The integrated construction eliminates any movement between the grip section and the collars, which could otherwise develop over time. The handlebar grip is your key contact point for controlling your bike. Having a grip suited to your individual demands is hugely important. The exclusive Ultra Tacky compound we use in this grip gives the ultimate in control, through its unique, adhesive surface coating.
This Traction grip pattern was designed to give ultimate control in all conditions. The additional mechanical grip of the Traction pattern means that you can retain control, no matter what the weather might throw at you.

Renthal Lock-On Traction Ultra Tacky : Designed to ride faster, jump further and last longer

Features Forward Facing Ramped Finger Ridges;
When pulling back on the handlebars, the majority of the grip and torque is concentrated through the fingers. Forward facing, ramped ridges in the finger area give increased grip when pulling back, yet lay flat in normal riding conditions, for improved comfort.

Rearward Facing Angled Palm Grooves;
When braking or steep descending, the majority of the torque and grip is concentrated through the palm. Grooves cut with a rearward facing angle give improved grip in this situation. As the ramped groove is cut into the grip, it gives a comfortable, large surface area for the palm in normal riding conditions.

Consistent Pattern;
The grooves and ridges are consistent across the width of the grip, to accommodate riding with your hand in any position. Be it right in the centre, or with the heal of the hand over the end of the grip, the additional traction is just as effective.

Open-Ended Grip Features;
Riding in extreme conditions, crashes are inevitable, which can result in the grip getting packed with mud. We designed the grips to have open-ended grip features, allowing mud to be purged off the end of the grip.

Offset Grip Material;
For comfort, the grip material under the palm area has been increased to give improved cushioning. Thinner grip material is used under the finger area to keep the overall outside diameter the same.

Ultra Tacky Grip Compound
Renthal’s unique Ultra Tacky compound constantly produces and renews a sticky surface coating. The resulting adhesive grip surface massively increases control and reduces fatigue. If the grip loses its stickiness, simply wash with clean water and allow the grips to air dry to re-activate.